IEC140000140 V1 EN-US
Figure 12: Drop-down menu with commands for testing the PMU
• Switch to the Protocol Specific tab. Here, all the IEEE C37.118 message types can be seen. If the
HeaderFrame is not included, ask the PMU to send the header frame via the Send Header Frame
command (Previous stage). Open each message type and observe the content of each message.
Section 9 1MRK 504 165-UUS Rev. J
Establishing connection and verifying the IEEE C37.118/1344 communication
74 Transformer protection RET670
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
