IEC140000141 V1 EN-US
Figure 13: All the IEEE C37.118 message types
• It is also possible to capture the IEEE C37.118 synchrophasor data in an Excel file. This is done by
navigating to File /Capture /Start Stream Debug Capture... The tool will ask to Set Stream Debug
Capture File Name and path to save the capture file.
1MRK 504 165-UUS Rev. J Section 9
Establishing connection and verifying the IEEE C37.118/1344 communication
Transformer protection RET670 75
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
