IEC05000611 V2 EN-US
Figure 64: GDE: Object properties windows for text insertion
The single line diagram screen can display different values, with the
help of the dynamic text fields. Please remember that these values
are displayed by default in SI units (for example - active power is
displayed in W). Modify the Scale Factor in the object properties
(see
Figure 65) to display values in more readable units (for
example MW). Be sure to write the proper unit under the Unit Text
field.
As the function delivers angles in radians, a scale factor of 180/pi =
57.3 shall be used to display the angle in degrees
IEC10000174 V1 EN-US
Figure 65: GDE: Object properties window for unit change
1MRK 511 398-UEN C Section 7
Local HMI engineering
670 series 2.2 IEC 105
Engineering manual
To Next Page
Loading...
