version for local HMI and the IO boards included in the IED will be read
from the IED directly.
• Offline mode: when the physical IED is not available or not connected to
PCM600, the engineering steps are done without any synchronization
with the IED. The offline configuration in PCM600 can be synchronized
with the physical IED at a later state by connecting the IED to PCM600.
The green check mark (as shown in
Figure 16) indicates that
communication between the IED object in PCM600 and the
physical IED is established.
IEC09000361 V2 EN-US
Figure 16: Plant structure with pingable IED
• Import a template IED from a *.pcmt files available in the template library.
• Import a pre-configured IED available as a *.pcmt file.
Inserting an IED in online mode
An IEC 61850 edition 2 mode cannot be inserted in an IEC 61850
edition 1 project and vice versa.
Procedure:
1MRK 511 398-UEN C Section 4
Setting up a project
670 series 2.2 IEC 49
Engineering manual
To Next Page
Loading...
