Name Type Default Description
INPUT12 BOOLEAN 0 Binary channel 12
INPUT13 BOOLEAN 0 Binary channel 13
INPUT14 BOOLEAN 0 Binary channel 14
INPUT15 BOOLEAN 0 Binary channel 15
INPUT16 BOOLEAN 0 Binary channel 16
GUID-D3A8067F-80F8-4174-BD2D-4C43F4B99020 v2.1.1
B2RBDR to B8RBDR functions have the same input signal specifications as B1RBDR but with
different numbering:
• B2RBDR: INPUT17 to INPUT32 (binary channels 17 to 32)
• B3RBDR: INPUT33 to INPUT48 (binary channels 33 to 48)
• B4RBDR: INPUT49 to INPUT64 (binary channels 49 to 64)
• B5RBDR: INPUT65 to INPUT80 (binary channels 65 to 80)
• B6RBDR: INPUT81 to INPUT96 (binary channels 81 to 96)
• B7RBDR: INPUT97 to INPUT112 (binary channels 97 to 112)
• B8RBDR: INPUT113 to INPUT128 (binary channels 113 to 128)
16.6.5 Settings
PID-3949-SETTINGS v2
Table 776: DRPRDRE Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation Disabled/Enabled
PreFaultRecT 0.05 - 9.90 s 0.01 0.10 Pre-fault recording time
PostFaultRecT 0.1 - 10.0 s 0.1 0.5 Post-fault recording time
TimeLimit 0.5 - 10.0 s 0.1 1.0 Fault recording time limit
PostRetrig Disabled
Enabled
- - Disabled Post-fault retrig enabled (On) or not (Off)
MaxNoStoreRec 10 - 100 - 1 100 Maximum number of stored disturbances
ZeroAngleRef 1 - 30 Ch 1 1 Trip value recorder, phasor reference
channel
OpModeTest Disabled
Enabled
- - Disabled Operation mode during test mode
PID-4014-SETTINGS v5
Table 777: A1RADR Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation01 Disabled
Enabled
- - Disabled Operation On/Off
Operation02 Disabled
Enabled
- - Disabled Operation On/Off
Operation03 Disabled
Enabled
- - Disabled Operation On/Off
Table continues on next page
1MRK 502 066-UUS B Section 16
Monitoring
1069
Technical manual
To Next Page
Loading...
