ABB Relion 670 series - Page 1076

Name Values (Range) Unit Step Default Description
Operation04 Disabled
Enabled
- - Disabled Operation On/Off
Operation05 Disabled
Enabled
- - Disabled Operation On/Off
Operation06 Disabled
Enabled
- - Disabled Operation On/Off
Operation07 Disabled
Enabled
- - Disabled Operation On/Off
Operation08 Disabled
Enabled
- - Disabled Operation On/Off
Operation09 Disabled
Enabled
- - Disabled Operation On/Off
Operation10 Disabled
Enabled
- - Disabled Operation On/Off
Table 778: A1RADR Non group settings (advanced)
Name Values (Range) Unit Step Default Description
NomValue01 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 1
UnderTrigOp01 Disabled
Enabled
- - Disabled Use under level trigger for analog channel 1
(on) or not (off)
UnderTrigLe01 0 - 200 % 1 50 Under trigger level for analog channel 1 in
% of signal
OverTrigOp01 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 1
(on) or not (off)
OverTrigLe01 0 - 5000 % 1 200 Over trigger level for analog channel 1 in %
of signal
NomValue02 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 2
UnderTrigOp02 Disabled
Enabled
- - Disabled Use under level trigger for analog channel
2 (on) or not (off)
UnderTrigLe02 0 - 200 % 1 50 Under trigger level for analog channel 2 in
% of signal
OverTrigOp02 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 2
(on) or not (off)
OverTrigLe02 0 - 5000 % 1 200 Over trigger level for analog channel 2 in %
of signal
NomValue03 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 3
UnderTrigOp03 Disabled
Enabled
- - Disabled Use under level trigger for analog channel
3 (on) or not (off)
UnderTrigLe03 0 - 200 % 1 50 Under trigger level for analog channel 3 in
% of signal
OverTrigOp03 Disabled
Enabled
- - Disabled Use over level trigger for analog channel 3
(on) or not (off)
OverTrigLe03 0 - 5000 % 1 200 Overtrigger level for analog channel 3 in %
of signal
NomValue04 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 4
Table continues on next page
Section 16 1MRK 502 066-UUS B
Monitoring
1070
Technical manual