ABB Relion 670 series - Page 1122

18.4.4 Technical data
IP14434-1 v1
M15031-1 v7
Table 811: Communication protocols
Function Value
Protocol IEC 61850-8-1
Communication speed for the IEDs 100BASE-FX
Protocol IEC 60870–5–103
Communication speed for the IEDs 9600 or 19200 Bd
Protocol DNP3.0
Communication speed for the IEDs 300–19200 Bd
Protocol TCP/IP, Ethernet
Communication speed for the IEDs 100 Mbit/s
18.4.5 Generic communication function for Single Point indication
SPGAPC, SP16GAPC
SEMOD55999-1 v4
18.4.5.1 Functionality
SEMOD55713-5 v7
Generic communication function for Single Point indication SPGAPC is used to send one single
logical signal to other systems or equipment in the substation.
18.4.5.2 Function block
SEMOD54714-4 v4
SPGAPC
BLOCK
^IN
IEC14000021-1-en.vsd
IEC14000021 V1 EN-US
Figure 583: SPGAPC function block
SP16GAPC
BLOCK
^IN1
^IN2
^IN3
^IN4
^IN5
^IN6
^IN7
^IN8
^IN9
^IN10
^IN11
^IN12
^IN13
^IN14
^IN15
^IN16
IEC14000020-1-en.vsd
IEC14000020 V1 EN-US
Figure 584: SP16GAPC function block
Section 18 1MRK 502 066-UUS B
Station communication
1116
Technical manual