ABB Relion 670 series - Page 1205

18.11.2 Functionality
GUID-1D2DBC22-4F04-4809-B34E-8939D442C185 v2
GOOSEDPRCV is used to receive a double point value using IEC61850 protocol via GOOSE.
18.11.3 Function block
GUID-ED277880-FB5D-4630-872F-9F343D449FFE v1
IEC10000249-1-en.vsd
GOOSEDPRCV
BLOCK ^DPOUT
DATAVALID
COMMVALID
TEST
IEC10000249 V1 EN-US
Figure 610: GOOSEDPRCV function block
18.11.4 Signals
PID-3981-INPUTSIGNALS v4
Table 910: GOOSEDPRCV Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of function
PID-3981-OUTPUTSIGNALS v4
Table 911: GOOSEDPRCV Output signals
Name Type Description
DPOUT INTEGER Double point output
DATAVALID BOOLEAN Data valid for double point output
COMMVALID BOOLEAN Communication valid for double point output
TEST BOOLEAN Test output
18.11.5 Settings
PID-3981-SETTINGS v4
Table 912: GOOSEDPRCV Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation Disabled/Enabled
18.11.6 Operation principle
GUID-82A1C8A2-827A-40EF-8E58-F573E29E468E v2
The DATAVALID output will be HIGH if the incoming message is with valid data.
The COMMVALID output will become LOW when the sending IED is under total failure condition
and the GOOSE transmission from the sending IED does not happen.
1MRK 502 066-UUS B Section 18
Station communication
1199
Technical manual