ABB Relion 670 series - Page 1208

18.13.2 Functionality
GUID-759CB016-2B4D-4D98-82E1-592044983D53 v2
GOOSEMVRCV is used to receive measured value using IEC61850 protocol via GOOSE.
18.13.3 Function block
GUID-A0B333CC-AEF4-40EA-B152-364648AB78D3 v1
IEC10000251-1-en.vsd
GOOSEMVRCV
BLOCK ^MVOUT
DATAVALID
COMMVALID
TEST
IEC10000251 V1 EN-US
Figure 612: GOOSEMVRCV function block
18.13.4 Signals
PID-2530-INPUTSIGNALS v18
Table 916: GOOSEMVRCV Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of function
PID-2530-OUTPUTSIGNALS v18
Table 917: GOOSEMVRCV Output signals
Name Type Description
MVOUT REAL Measurand value output
DATAVALID BOOLEAN Data valid for measurand value output
COMMVALID BOOLEAN Communication valid for measurand value output
TEST BOOLEAN Test output
18.13.5 Settings
PID-2530-SETTINGS v18
Table 918: GOOSEMVRCV Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Disabled Operation Disabled/Enabled
18.13.6 Operation principle
GUID-7B24A6D3-2E5F-4961-A0A6-86436373809E v3
The DATAVALID output will be HIGH if the incoming message is with valid data.
The COMMVALID output will become LOW when the sending IED is under total failure condition
and the GOOSE transmission from the sending IED does not happen.
Section 18 1MRK 502 066-UUS B
Station communication
1202
Technical manual