ABB Relion 670 series - Page 1215

18.18 Security events on protocols SECALARM
18.18.1 Security alarm SECALARM
GUID-205B0024-DA06-4369-8707-5E1D2D035995 v2
18.18.1.1 Signals
PID-3430-OUTPUTSIGNALS v5
Table 928: SECALARM Output signals
Name Type Description
EVENTID INTEGER EventId of the generated security event
SEQNUMBER INTEGER Sequence number of the generated security event
18.18.1.2 Settings
PID-3430-SETTINGS v5
Table 929: SECALARM Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Enabled Operation On/Off
18.19 Activity logging parameters ACTIVLOG
18.19.1 Activity logging ACTIVLOG
GUID-BED7C3D6-6BE3-4DAC-84B3-92239E819CC0 v1
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be configured with IP
address; IP port number and protocol format. The format can be either syslog (RFC 5424) or
Common Event Format (CEF) from ArcSight.
18.19.2 Settings
PID-6583-SETTINGS v4
Table 930: ACTIVLOG Non group settings (basic)
Name Values (Range) Unit Step Default Description
ExtLogSrv1Type Disabled
ExtLogSrv1Type
SYSLOG TCP/IP
CEF TCP/IP
- - Disabled External log server 1 type
ExtLogSrv1Port 1 - 65535 - 1 514 External log server 1 port number
ExtLogSrv1IP 0 - 18 IP
Address
1 127.0.0.1 External log server 1 IP-address
Table continues on next page
1MRK 502 066-UUS B Section 18
Station communication
1209
Technical manual