21.4.2 Settings
GUID-3C49A222-FFE4-492B-A96C-9E9965FA2CB4 v2
PID-4034-SETTINGS v4
Table 975: TERMINALID Non group settings (basic)
Name Values (Range) Unit Step Default Description
StationName 0 - 18 - 1 Station name Station name
StationNumber 0 - 99999 - 1 0 Station number
ObjectName 0 - 18 - 1 Object name Object name
ObjectNumber 0 - 99999 - 1 0 Object number
UnitName 0 - 18 - 1 Unit name Unit name
UnitNumber 0 - 99999 - 1 0 Unit number
IEDMainFunType 0 - 255 - 1 0 IED main function type for IEC60870-5-103
TechnicalKey 0 - 16 - 1 AA0B0Q0A0 Technical key (part 1)
0 - 16 - 1 Technical key (part 2)
0 - 16 - 1 Technical key (part 3)
0 - 16 - 1 Technical key (part 4)
21.5 Product information
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v1
21.5.1 Functionality
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v6
The Product identifiers function contains constant data (i.e. not possible to change) that uniquely
identifies the IED:
• ProductVer
• ProductDef
• FirmwareVer
• SerialNo
• OrderingNo
• ProductionDate
• IEDProdType
The settings are visible on the local HMI , under Main menu/Diagnostics/IED status/Product
identifiersand underMain menu/Diagnostics/IED Status/IED identifiers
This information is very helpful when interacting with ABB product support (e.g. during repair and
maintenance).
21.5.2 Settings
GUID-168CD792-8811-43B5-8760-74ED82DE17F7 v4
The function does not have any parameters available in the local HMI or PCM600.
Section 21 1MRK 502 066-UUS B
Basic IED functions
1258
Technical manual
To Next Page
Loading...
