ABB Relion 670 series - Page 1309

Name Type Default Description
BO6 BOOLEAN 0 Binary output 6
BO7 BOOLEAN 0 Static binary output 7
BO8 BOOLEAN 0 Static binary output 8
BO9 BOOLEAN 0 Static binary output 9
BO10 BOOLEAN 0 Static binary output 10
BO11 BOOLEAN 0 Static binary output 11
BO12 BOOLEAN 0 Static binary output 12
PID-3939-OUTPUTSIGNALS v3
Table 1017: SOM Output signals
Name Type Description
STATUS BOOLEAN Static binary output module status
22.2.9.4 Settings
PID-3939-SETTINGS v4
Table 1018:SOM Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Enabled Operation Disabled/Enabled
22.2.9.5 Monitored data
PID-3939-MONITOREDDATA v4
Table 1019:SOM Monitored data
Name Type Values (Range) Unit Description
STATUS BOOLEAN 0=Ok
1=Error
- Static binary output module status
BO1VALUE BOOLEAN 1=1
0=0
- Binary output 1 value
BO1FORCE BOOLEAN 0=Normal
1=Forced
- Binary output 1 force
BO1 BOOLEAN 0=Normal
1=Forced
2=Blocked
- Binary output 1 status
BO2VALUE BOOLEAN 1=1
0=0
- Binary output 2 value
BO2FORCE BOOLEAN 0=Normal
1=Forced
- Binary output 2 force
BO2 BOOLEAN 0=Normal
1=Forced
2=Blocked
- Binary output 2 status
Table continues on next page
1MRK 502 066-UUS B Section 22
IED hardware
1303
Technical manual