22.3.5 Wall mounting dimensions
M11569-3 v4
IEC04000471 V2 EN-US
Figure 678: Wall mounting
Case size (inches) A B C D E
6U, 1/2 x 19” 10.50 10.52 10.74 15.36 9.57
6U, 3/4 x 19” 15.92 14.94 10.74 15.36 9.57
6U, 1/1 x 19” 20.31 19.33 10.74 15.36 9.57
22.3.6 External resistor unit for high impedance differential protection
SEMOD154026-4 v3
WARNING! - USE EXTREME CAUTION!
Dangerously high voltages might be present
on this equipment, especially on the plate with resistors. Do any maintenance
ONLY if the primary object protected with this equipment is de-energized. If
required by national law/standard enclose the plate with resistors with a
protective cover or in a separate box!
Section 22 1MRK 502 066-UUS B
IED hardware
1340
Technical manual
To Next Page
Loading...
