22.4.1.2 Mounting procedure for flush mounting
M11942-2 v4
1
3
5
4
2
6
IEC08000161-2-en.vsd
IEC08000161 V2 EN-US
Figure 682: Flush mounting details.
PosNo Description Quantity Type
1 Sealing strip, used to obtain IP54
class. The sealing strip is factory
mounted between the case and
front plate.
- -
2 Fastener 4 -
3 Groove - -
4 Screw, self tapping 4 2.9x9.5 mm
5 Joining point of sealing strip - -
6 Panel - -
1MRK 502 066-UUS B Section 22
IED hardware
1343
Technical manual
To Next Page
Loading...
