22.4.2.2 Mounting procedure for 19” panel rack mounting
M11948-2 v7
1a
2
1b
IEC08000160-2-en.vsd
IEC08000160 V2 EN-US
Figure 683: 19” panel rack mounting details
The required torque for the screws is 3.5 Nm.
PosNo Description Quantity Type
1a, 1b Mounting angles, can be mounted either
to the left or the right side of the case
2 -
2 Screw 8 M4x6
3 Washer 8 M4x6
1MRK 502 066-UUS B Section 22
IED hardware
1345
Technical manual
To Next Page
Loading...
