Function Range or values Accuracy
Weight 10.58 lbs
Assembling 6 x 0.20 inch screws (3 at bottom and 3 at top)
Rated rotor injection voltage 250 V
Burden, static excitation system X1:1 to X1:7
< 0.5 VA at 100 V external disturbance
Burden, static excitation system X1:1 or X1:7 to 0 V
< 1.0 VA at 100 V external disturbance
Burden, brushless excitation system X1:1 and X1:7 to
0 V
< 1.5 VA at 100 V external disturbance
Installation category III
Pollution degree 2
GUID-E7B9192F-ABD5-4395-94F2-ED0B2F0DFEB7 v3
Table 1067:REX062 Technical data
Specifications Values
Case size 8.58 x 5.91 x 9.57 inches (W x D x H)
Weight 9.92 lbs
Assembling 6 x 0.20 inch screws (3 at bottom and 3 at top)
Rated stator injection voltage 240 V
Rated stator voltage 240 V
Burden, injection X1:2 and X1:4
< 25 VA at 12 V ground fault voltage
< 100 VA at 24 V ground fault voltage
Installation category III
Pollution degree 2
GUID-52764B12-501B-4B46-9703-E3EB95E06509 v3
Table
1068:
Degree of protection
Description Values
REX060
Front
Panel mounted, front
Rear, sides, top, bottom and connection terminals
IP40
IP54
IP20
REX061 and REX062
Top
Front, rear, sides and bottom
IP41
IP20
1MRK 502 066-UUS B Section 23
Injection equipment hardware
1369
Technical manual
To Next Page
Loading...
