IEC 61850 ANSI Function description Generator
REG670
SLGAPC Logic rotating switch for function selection
and LHMI presentation
15
VSGAPC Selector mini switch 20
DPGAPC Generic communication function for Double
Point indication
16
SPC8GAPC Single point generic control 8 signals 5
AUTOBITS AutomationBits, command function for
DNP3.0
3
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC
60870-5-103
50
I103POSCMD IED commands with position and select for
IEC 60870-5-103
50
I103POSCMDV IED direct commands with position for IEC
60870-5-103
10
I103IEDCMD IED commands for IEC 60870-5-103 1
I103USRCMD Function commands user defined for IEC
60870-5-103
1
Secondary
system
supervision
CCSSPVC 87 Current circuit supervision 0-5
FUFSPVC Fuse failure supervision 0-3
VDSPVC 60 Fuse failure supervision based on voltage
difference
0-3
Logic
SMPPTRC 94 Tripping logic 12
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
WRNCALH Logic for group warning 5
INDCALH Logic for group indication 5
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMORY,
SRMEMORY,
TIMERSET, XOR
Basic configurable logic blocks (see Table 3) 40-280
Table continues on next page
Section 2 1MRK 502 066-UUS B
Available functions
60
Technical manual
To Next Page
Loading...
