GUID-59C6C5BF-9874-4C47-966F-39711569880F V1 EN
Figure 96: Locating LED blocks in the Object Types pane
4. In the Function Block Instance dialog, change the names and execution orders
of the function blocks and click Assign.
The names and execution orders can be edited later by right-clicking the desired
function block.
GUID-C1E39771-3067-4416-B96A-4A51BBCA451D V1 EN
Figure 97: Changing LED name and execution order
5. Connect the inputs to the correct LED function blocks by dragging from the
variable or OR function block output to the input of the LED function block.
Rearranging may be required to fit everything on the page.
Connect to the right input of the LED function block to achieve
correct functionality of the LED panel. Typically, LED function
blocks are connected to variables or OR function blocks that
should already be present; just connect the LED function block
inputs to the corresponding variables or outputs of the OR
function block.
1MRS757810 C Section 8
Configuration migration
REC615 and RER615 133
Engineering Manual
To Next Page
Loading...
