GUID-E36C02C9-E01B-4575-98AB-ED7B180DE17D V1 EN
Figure 69: SLD Editor
SLD in the protection relay is configured using the Graphical Display
Editor of PCM600, not in IET600
In addition to the substation topology configuration, logical nodes of IEDs need to be
mapped to proper objects, for example, to support the automatic bay configuration via
SCL files in the SCADA system. Logical nodes are mapped with the LN Mapping
Editor.
1MRS757809 C Section 8
Engineering of event reporting with IET600
REC615 and RER615 103
Engineering Guide
To Next Page
Loading...
