mode is "Toggle", the output state freezes and cannot be changed while the BLOCK
input is active. If
Operation mode
is "Pulsed", the activation of the BLOCK input
resets the outputs to the "False" state and further control requests are ignored
while the BLOCK input is active.
From the remote communication point of view SPCGAPC toggled
operation mode is always working as persistent mode. The output O#
follows the value written to the input IN#.
3.17.12.3 Signals
Table 195: SPCGAPC Input signals
Name Type Default Description
BLOCK BOOLEAN 0=False Block signal for acti-
vating the blocking
mode
IN1 BOOLEAN 0=False Input of control point
1
IN2 BOOLEAN 0=False Input of control point
2
IN3 BOOLEAN 0=False Input of control point
3
IN4 BOOLEAN 0=False Input of control point
4
IN5 BOOLEAN 0=False Input of control point
5
IN6 BOOLEAN 0=False Input of control point
6
IN7 BOOLEAN 0=False Input of control point
7
IN8 BOOLEAN 0=False Input of control point
8
IN9 BOOLEAN 0=False Input of control point
9
IN10 BOOLEAN 0=False Input of control point
10
IN11 BOOLEAN 0=False Input of control point
11
IN12 BOOLEAN 0=False Input of control point
12
IN13 BOOLEAN 0=False Input of control point
13
IN14 BOOLEAN 0=False Input of control point
14
Table continues on the next page
Basic functions 1MRS758755 C
174 REC615 & RER615
Technical Manual
To Next Page
Loading...
