REB 207 Private range
REG 150 Private range
REQ 245 Private range
RES 118 Private range
Refer to the tables in the Technical reference manual /Station communication, specifying the
information types supported by the communication protocol IEC 60870-5-103.
To support the information, corresponding functions must be included in the protection IED.
There is no representation for the following parts:
• Generating events for test mode
• Cause of transmission: Info no 11, Local operation
Glass or plastic fiber should be used. BFOC/2.5 is the recommended interface to use
(BFOC/2.5 is the same as ST connectors). ST connectors are used with the optical power as
specified in standard.
For more information, refer to IEC standard IEC 60870-5-103.
18.7 DNP3 Communication protocol
18.7.1 Application
GUID-EF1F0C38-9FF6-4683-8B10-AAA372D42185 v1
For more information on the application and setting guidelines for the DNP3 communication
protocol refer to the DNP3 Communication protocol manual.
Section 18 1MRK 511 358-UEN A
Station communication
430
Application manual
To Next Page
Loading...
