GUID-2D1593E7-C928-45FC-88C8-C9D20CA78C59 V1 EN
Figure 74: Selecting signals
4. Click OK.
Configuring measurement items
The measurement limits, scaling and order can be independently configured in the
Object Properties pane.
Click a measurement to select the measurement item. Then click the
same item again to select the measurement list.
• Set the measurement properties.
If the property value is set to "Automatic", the LHMI uses the value defined by
the data model.
Section 6 1MRS759117 A
LHMI engineering
98 REX640
Engineering Manual
To Next Page
Loading...
