ABB RELION REX640 - Protocol control

1. Create a new symbol in one of the alternative ways.
• On the menu bar, point to Graphical Display Editor, point to Symbol
Editor and select Create Symbol.
• Right-click the symbol library and click Create Symbol.
•
On the toolbar, click
.
2. In the Create Symbol dialog, specify a name, category, size and states and click
Create.
GUID-C7517243-D9A5-4890-89EE-523E7D6D67CD V1 EN
Figure 89: Creating a new symbol
Section 6 1MRS759117 A
LHMI engineering
110 REX640
Engineering Manual