ABB RELION REX640 - Opening and Closing Load Profile Tool

5.4.1 Opening and closing Load Profile tool
• To open the Load Profile tool, right-click an IED in the PCM600 project tree and
select Load Profile Tool.
GUID-6826AE4B-3491-46CA-B487-5C948712ACC4 V1 EN
Figure 62: Opening the Load Profile tool
• To close the Load Profile tool, click Close in the tool.
The Load Profile tool runs in the same process as PCM600 but in a separate
window. Multiple instances of the tool can be run at the same time. Any open tool
instances are closed without confirmation when PCM600 is closed.
Section 5 1MRS759117 A
Protection and control engineering
84 REX640
Engineering Manual