3.16.1 SMV stream sender (IEC 61850-9-2LE) SMVSENDER
3.16.1.1 Function block
Figure 86: Function block
3.16.1.2 Functionality
The SMV stream sender (IEC 61850-9-2LE) function SMVSENDER is used for
activating the SMV sending functionality. It adds/removes the sampled value
control block and the related data set into/from the sending device's configuration.
It has only input signals.
SMVSENDER can be disabled with the
Operation
setting value “off”. Toggling
SMVSENDER “on” or “off” can be done from the LHMI. When disabled, the sending of
the sample values is disabled.
3.16.1.3 Settings
Table 115: SMVSENDER Settings
Parameter Values (Range) Unit Step Default Description
Operation
1=on
5=off
1=on Operation
1MRS759142 F Basic functions
REX640
Technical Manual
189
To Next Page
Loading...
