ABB RELION REX640 - Inspecting Product; Returning a Product Damaged During Transport; Storing; Cleaning

3.2.3 Inspecting product
• Inspect the device for any visible damage.
Operation of damaged equipment may result in degraded process
performance leading to personal injury or death.
If the device has been found damaged on receipt of delivery from ABB, make a claim
against the transport company at the time of receipt of the device. Notify the local
ABB representative immediately about the damage.
3.2.4 Returning a product damaged during transport
• Contact the local ABB representative and check the device return process for
returning a damaged product.
3.2.5 Storing
If the device is stored before its use, it must be done in the original transport packaging
in a dry and dust-free place.
• Observe the environmental requirements stated in the technical manual.
3.2.6 Cleaning
1. Unplug the power cord from the power supply and unplug all connectors so that
all hazardous live parts are disconnected and the device is switched off.
2.
Use a dry cloth to clean the surface of BIO-Tester Relion
®
REX640.
2NGA000105 B Section 3
Unpacking, inspecting and storing
BIO-Tester Relion® REX640 9
User Manual