ABB RELION Series - Page 563

Function Settings for limit value supervision
Residual current measurement
(RESCMMXU)
High limit A high limit res
Low limit -
High-high limit A Hi high limit res
Low-low limit -
Frequency measurement (FMMXU) High limit F high limit
Low limit F low limit
High-high limit F high high limit
Low-low limit F low low limit
Residual voltage measurement
(RESVMMXU)
High limit V high limit res
Low limit -
High-high limit V Hi high limit res
Low-low limit -
Phase sequence current measurement
(CSMSQI)
High limit Ps Seq A high limit , Ng Seq
A high limit , Zro A high limit
Low limit Ps Seq A low limit , Ng Seq A
low limit , Zro A low limit
High-high limit Ps Seq A Hi high Lim , Ng
Seq A Hi high Lim , Zro A Hi
high Lim
Low-low limit
Ps Seq A low low Lim , Ng
Seq A low low Lim , Zro A low
low Lim
Phase sequence voltage measurement
(VSMSQI)
High limit Ps Seq V high limit , Ng Seq
V high limit , Zro V high limit
Low limit Ps Seq V low limit , Ng Seq V
low limit , Zro V low limit
High-high limit Ps Seq V Hi high Lim , Ng
Seq V Hi high Lim , Zro V Hi
high Lim
Low-low limit
Ps Seq V low low Lim , Ng
Seq V low low Lim ,
Three-phase power and energy
measurement (PEMMXU)
High limit -
Low limit -
High-high limit -
Low-low limit -
Deadband supervision
The deadband supervision function reports the measured value according to
integrated changes over a time period.
1MRS758755 A Section 8
Measurement functions
REC615 and RER615 557
Technical Manual