32
1MRS755225
Transformer Terminal
Technical Reference Manual, General
RET 54_
RET_Mimic
Fig. 5.1.2.2.-1 MIMIC configuration with the Relay Mimic Editor
The content of the alarm view is configured with the Relay Mimic Editor by defining
the ON and OFF state texts (max. 16 characters), see Figure 5.1.2.2.-2 below. For
defining the corresponding LED colors, refer to Section “Alarm LED indicators” on
page 86.
RET_LEDs2
Fig. 5.1.2.2.-2 Alarm channel configuration
Interlocking LED texts can also be defined in the view illustrated above, but the
interlocking LED colors cannot be changed. For the operation of the interlocking
LED, refer to Section “Interlocking” on page 88.
For more information about the use of the editor, refer to the Relay Mimic Editor
manual (see “Related documents” on page 9).
To Next Page
Loading...
