2105552MNAE | RMC-100 | 187
Figure 8-26: Update device software with package information
6. View under Package Information to verify that the RMC-100 package version is the required
version for the update.
7. For full update (OS and Flash):
a. Verify that the OS: RMC/RMC-LT OS checkbox is selected.
b. Verify that the App: RMC FLASH checkbox is selected.
8. For Flash-only update:
a. Verify that the App: RMC FLASH checkbox is selected.
b. Clear any other unnecessary items in the package.
9. Click Send.
10. View the status messages in the Loader Status Logs field. When the update is complete, the
"Device info updated" message displays indicating that the software has been sent and
activated successfully.
IMPORTANT NOTE: Updates to the main application (App) might require an update to PCCU32. In
these cases, download a new version of PCCU32.
Review embedded software and PCCU release
Select PCCU from the main ABB product website (Figure 8-27) then, locate and
the latest PCCU version (Figure 8-28).
Figure 8-27: PCCU in the main ABB website - Product Listing
To Next Page
Loading...
