ABB S800 I/O - DI885 Module Details

*HQHUDO,QIRUPDWLRQDQG,QVWDOODWLRQ8VHU¶V*XLGH
$SSHQGL[$ 5HIHUHQFHV
118 3BSE 020 923R101
7 HFKQLFDO'DWD
7 DEOH $ 7%0RGXOH%XV2SWLFDO3RUW6SHFLILFDWLRQV
,WHP 7% 7%
Application S800 I/O clusters and ABB
variable drives
ABB variable drives
Configuration Simplex and duplex Simplex
Fibers Plastic and HCS (Hard Clad
Silica)
Plastic
Connector HP Versatile Link HP Versatile Link
Optical ModuleBus Fiber optic interface, one
transmit and one receive
connection for max. 10 Mbit/s.
Fiber optic interface, one
transmit and one receive
connection for max. 5 Mbit/s.
Indicators Tx LED: Yellow indicates
transmitting of data on the
optical ModuleBus
Rx LED: Yellow indicates
receiving of data on the optical
ModuleBus
Tx LED: Yellow indicates
transmitting of data on the
optical ModuleBus
Rx LED: Yellow indicates
receiving of data on the optical
ModuleBus
Current consumption +5V 100 mA 100 mA
Current consumption +24V 20 mA 20 mA
Power dissipation 0.5 W 0.5 W
Safety Classification Class I according to IEC 536;
(earth protected)
Class I according to IEC 536;
(earth protected)
Protection Rating IP20 according to IEC 529,
(IEC 144)
IP20 according to IEC 529,
(IEC 144)
Rated insulation voltage 50V 50V
Dielectric test voltage 500V a.c. 500V a.c.
Width 20 mm (0.79”) 20 mm (0.79”)
Depth 39.6 mm (1.6”) 39.6 mm (1.6”)
Height 39.6 mm (1.6”) 39.6 mm (1.6”)
Weight 19 g (0.042 lbs.) 19 g (0.042 lbs.)