HART UNIVERSAL
HART UNIVERSAL CONFIGURATION
F - 3
Enter a day and press . Enter a month and
press . Enter a year and press .
This date can represent the creation date of the con-
figuration, the date the device or element was
installed, or some other significant date.
Enter a value between 0 and 100. Refer to the Plati-
num Standard Series Smart Temperature Trans-
mitter EBTH instruction for description.
Select engineering units. This appears only for pres-
sure and temperature transmitters.
Enter the lower range temperature value and press
. Input the upper range value.
Select YES.
Configuration ID tag name just configured will be in
the upper left corner if the configuration is saved. It
becomes the working configuration.
Key Display Comments
ENTER
DATE:
DAY : nn
MONTH : nn
YEAR : nnnn
ENTER
ENTER ENTER
ENTER
DAMPING:
(0-100 SEC)
nn.nn SECS
ENTER
ENGINEERING UNIT
→ nnnnnn nnnnnn
nnnnnn nnnnnn
ENTER
LOWER RANGE VAL
nn.nn
o
C
UPPER RANGE VAL
nn.nn
o
C
ENTER
ENTER
STORE THIS
CONFIGURATION
NO
→ YES
ENTER
ID TAGNAME
READY
To Next Page
Loading...
