ABB STT04 - Page 170

TBN580 TRANSMITTER
CREATE/MODIFY CONFIGURATION
K - 3
Select 3.01 K BALCO.
When NONE is selected, the STT04 terminal
branches to a TEMPERATURE DISPLAY UNITS
selection screen. Choose the desired temperature
unit.
For this example select AUTO SOLUTION.
NOTE: Other temperature compensation selections
branch to a TEMPERATURE DISPLAY UNITS selec-
tion screen.
This screen is unique to the AUTO SOLUTION
selection of the TEMP COMP TYPE. Other
selections go to the temperature display units.
Select NO.
If YES is selected, enter 5 input and output points.
Values must be between 0 and 100%.
Refer to the Smart Specific Ion Transmitter Series
TBN580 instruction for description.
Enter a value between 0 and 32. Refer to the Smart
Specific Ion Transmitter Series TBN580 instruction
for description.
Key Display Comments
ENTER
TEMP COMP INPUT
→ 3.01 K BALCO
NONE
ENTER
TEMP COMP TYPE
MANUAL
AUTO NERNSTIAN
→ AUTO SOLUTION
AUTO PURE H2O
ENTER
ENTER SOLUTION
CO-EFFICIENT
±n.nnn pH per
10°C (from 25°C)
ENTER
TEMPERATURE
DISPLAY UNITS
→°C
°F
ENTER
OUTPUT FUNC GEN
→ NO
YES
ENTER
OUTPUT ACTION:
→ NORMAL
REVERSE
ENTER
DAMPING:
(0-32 SEC)
_nn.nn