Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.6 Removing cartridge group
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
Control dimension u [mm]
Dimension TPL73-B TPL77-B TPL80-B TPL85-B
u 18.6 19.0 19.6 27.6
The compressor casing internal part has now been detached from the
compressor casing external part (74000) and can be removed.
Removing the compressor
casing internal part
u Unscrew nuts (74027) and remove them together with washers
(74018).
u Remove six studs (74026 / 74029) from the upper section and screw
in four guide studs (90320).
u Leave two holes free for lifting device (90190).
u Using press-off screws (90900), press off the compressor casing in-
ternal part (76000) until the lifting device (90190) with shackle
(90195) can be attached and secured to the crane.
u Remove the compressor casing internal part along with the wall insert
and the diffuser.
Page 103 / 151
To Next Page
Loading...
