Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
Fitting the compressor
casing external part
u Attach lifting device (90190/90195) to compressor casing external
part (74000) and secure to a crane.
u Screw the press-off nuts (61090), evenly distributed around the cir-
cumference of the bearing casing, onto the studs up to the end of the
thread.
u Fit the compressor casing external part (74000) and secure with nuts
(61037).
u Secure the press-off nuts (61090) against the compressor casing
(74000) by tightening them to the appropriate torque (see Table of
tightening torques).
u Remove the lifting device (90190/90195).
Page 116 / 151
To Next Page
Loading...
