Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
WARNING
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
u Wear safety gloves.
Wear safety gloves to protect against mechanical hazards.
u Measure and note the axial clearance (A).
CAUTION
If the axial clearance A is out of tolerance, an ABB Turbocharging Ser-
vice Station must be contacted.
Axial clearance A [mm]
TPL73-B TPL77-B TPL80-B TPL85-B
0.40 … 0.58 0.43 … 0.64 0.46 … 0.69 0.54 … 0.79
u Remove four nuts (74027) together with washers (74018).
Installing filter silencer
u Mount filter silencer and secure with nuts (74027) complete with
washers (74018). (See section Removing and installing filter silencer).
u Connect oil pipes and all air lines in accordance with engine manufac-
turer’s instructions.
u Fit all insulation that was removed.
Page 121 / 151
To Next Page
Loading...
