Operation Manual / TPL73-B.. - 85-B11/ -B12
4 Operation / 4.4 Expected exchange intervals
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
4.4 Expected exchange intervals
Rotating components
The recommended replacement intervals for compressor wheels and tur-
bine wheels are defined depending on the operating conditions and
based on the safety concept (SiKo) for rotating parts. These intervals
can be found on the turbocharger rating plate.
Non-rotating components
Depending on the system-specific operating conditions, a distinction is
made between:
¡ the replacement interval for the bearing parts and
¡ the replacement interval for those non-rotating components that are
exposed to hot gases.
Decisive in this respect are various influencing parameters, which can
drastically shorten the replacement intervals of these parts in extreme
cases.
During the specified periodic service work, the individual components
are inspected for wear and, if necessary, replaced.
Page 40 / 151
To Next Page
Loading...
