ABB TPL73-B12 - Page 60

Operation Manual / TPL73-B.. - 85-B11/ -B12
5 Maintenance / 5.2 Cleaning the filter silencer
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
Punch out guide tube
u Hammer guide tube (03) free from peen fixing using a bolt (diameter
=16mm) and withdraw it.
Replace damaged parts of the complete cleaning pipe with original parts
from ABB Turbo Systems.
Fitting complete cleaning
pipe
u Refit guide tube (03) and peen fix it after putting insert units (E) in
place.
u Fit feed pipe (02) and screw onto injection pipe (01) using connector.
Page 58 / 151