ABB TTF300 - Process Display Information; HART LCD Error Messages

—
ABB MEASUREMENT & ANALYTICS |
COMMISSIONING INSTRUCTION | CI/TTF300- EN REV. H
TTF300
Field
-mount temperature transmitter
—
ABB Measurement & Analytics
For your local ABB contact, visit:
www.abb.com/contacts
For more
product information, visit:
www.abb.com/temperature
Temperature transmitter for all
communications protocols.
Redundancy thanks to two inputs.
Measurement made easy
CI/TTF300
-EN Rev. H 09.2022
—
TTF300
Introduction
The TTF300 is available with the HART,
PROFIBUS
PA and FOUNDATION Fieldbus
communication protocols.
The TTF300 has
global approvals for explosion
protection up to Zone
0.
The TTF300 implements various NAMUR
recommendations, including
NE 89 and NE 107.
Safety
-relevant applications up to SIL 3
(redundant) are supported in accordance with
IEC
61508.
Additional Info
rmation
Additional documentation on
TTF300 is available for
download free of charge at
www.abb.com/
temperature.
Alternatively simply scan this code:
—
We reserve the right to make technical changes or modify the contents of this document
without prior notice. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or po
ssible lack of
information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to th ird parties or utilization of its contents
– in whole
or in parts
– is forbidden without prior written consent of ABB.
© ABB 2022 3KXT221001R4401