1
1. Your safety first - at all times!
That is why our instruction manual begins with the
following recommendations:
Only install switchgear in closed rooms suitable for
electrical equipment.
Ensure that installation, operation and maintenance is
only carried out by qualified competent electricians.
Fully comply with the legally recognized standards
(IEC or local), the connection conditions of the local
electrical utility and the relevant safety at work
regulations.
Observe the relevant information in the instruction
manual for all actions involving switchgear.
DANGER!
Pay special attention to the hazard notes in the
instruction manual marked with this warning
symbol.
Make sure that the specified criteria are not
exceeded under switchgear operating
conditions.
Ensure the instruction manual is accessible to
all personnel involved in installation, operation
and maintenance.
The user’s personnel must act responsibly in
all matters relating to safety at work and
correct handling of the switchgear.
WARNING
Always follow the instruction manual and
respect the rules of good engineering practice!
Hazardous voltage can cause electrical shocks
and burns.
Disconnect power, then earth and shortcircuit
before proceeding with any work on this
equipment.
WARNING
Using of safety clothes like safety gloves
according to EN 388 Blade cut resistance class 5,
long sleeved work jacket or safety sleeves, safety
shoes is recommended during all activities done
with the switchgear.
WARNING
For ENA version: do not access the area behind or
alongside the switchgear when it is energised or
being energised.
If you have any further questions about this instruction
manual, ABB’s field service team will be pleased to
provide the required information.
We reserve all rights to this publication. Misuse,
including in particular, duplication and making this
manual - or extracts thereof available to third parties
is prohibited. We do not accept any responsibility for
the information provided, which is subject to change.
To Next Page
Loading...
