69
10. Product quality and environmental
protection
The UniGear panels are produced in compliance with
the requirements of international standards for the
quality management system and environmental
management system. In these fields, the level of
excellence achieved is documented by quality
certificates according to ISO 9001 and by the EMS
according to ISO 14 001.
End of life of product
ABB is committed to complying with the relevant legal
and other requirements for environmental protection
according to the ISO 14 001 standard.
The duty of company is to facilitate subsequent
recycling or disposal at the end of product life.
During disposal of the product, it is always necessary
to act in accordance with local legal requirements in
force.
The following methods of disposal are possible:
Disposal can either be carried out thermally in an
incineration plant or by storing on a waste site.
Recommended method of disposal
Metal material (Fe, Cu, Al, Ag, Zn, W, others)
Separatioin and recycling
Separation of metal and the disposal of rest
To Next Page
Loading...
