ABB Welcome M25102 C Series - Page 21

ABB Welcome
®
— 21 —
No.
Functions
1
Call resident
A visitor inputs an indoor station number (001) or apartment number (e.g.,
0101, programmed in advance) to call a resident.
*Also, the visitor can select a resident name with the or buttons of
the accompanying display module to make a call.
Pressing the button will cancel the call.
*This function is only available in Fig. 1.
2
Calling the guard unit
A visitor can call a guard unit by pressing the button if the guard unit is
available in the system.
3
Unlocking by password
Press " + password+ “ to release the default lock to the audio
module.
Press " +2 + + password + " to release the 2nd lock connected
to the audio module.
The initial password is 123456. Residents can set their own customized
password with indoor stations.
4
System engineering configuration
Press " + + system password + " to enter the system
engineering configuration menu.
The initial system password is 345678, and it can be modified by the
administrator.