ABB Welcome M25102 C Series - System Settings

ABB Welcome
®
— 46 —
5.5.5 System settings
In settings, press “#” to confirm and “*” to cancel. The default system password is 345678.
1. Enter the system settings menu
#* system password #
2. Configurations
(1) Set the device as an outdoor station or a gate station.
Outdoor station:
#* system password # =>
Configurations # => Device Type # => Outdoor St. # (Default)
Gate station:
#* system password # =>
Configurations # => Device Type # => Gate station #
(2) Set the call mode: Make a call by a physical address or a logical code.
Set the call mode by Physical Address:
#* system password # =>
Configurations # => Call mode # => Physical Address #
Menu__________
Configurations
-- ∧
Access Control
Contact
∨
Device Type_____
Outdoor St.
● --
∧
Gate Station
∨
Device Type_____
Outdoor St.
∧
Gate Station
●-
∨
Call mode_______
Physical Add.
●
Logic Add.: