ABB Welcome M25102 C Series - Page 48

ABB Welcome
®
— 48 —
3. Access control
(1) Door open code
The password can be set using 3-8 digits. The default door open password is "123456” and it can be changed at an outdoor station.
Users can set their own passwords at the indoor stations. A total of 6,000 passwords can be stored.
Set the door open password ON/OFF (default: 123456)
#* system password # =>
Access Control # => Door open code # => Enable/disable #
Modify the door open password
#* system password # =>
Access control # => Door open code # => Modify #
Reset the door open password
#* system password # =>
Access control # => Door open code # => Reset #
Door Open Code__
Disable
-- ∧
Modify
Reset
∨
==
＞
Done!
New Password:
******
==
＞
Re-enter:
******
==
＞
Done!
Reset Door Open
Code?
“#“ to Confirm
“*“ to Cancel
==
＞
Done!