ABB Zenith ZTS T Series - 2.6 Special Features Description

35
—
Mounting the automatic transfer switch
Mounting hole dimensions
Enclosure mounting dimensions
Type 1, in (mm) Type 3R/4/4X/12, in (mm)
Model ATS Rating (A) Poles Height (A1) Width (A2) Height (A1) Width (A2)
ZTS
ZTSD

    
    
    

    
    
    

    
    
  

1


  

1

  

1

  

1


    
    
1 4X enclosures add 0.05 inches to dimensions
—
Table 13 Zenith ZTS(D) panel mounting dimensions
—
Fig. 18 Automatic transfer switches, Mounting hole dimensions, refer to Table 9.2 for A1 and A2 values
A1
A2