ABB Zenith ZTS T Series - Chapter 5: Electronic Accessories

63
1
OPERATION, MAINTENANCE, AND INSTALLATION GUIDE
Warning
Hazardous voltage may be present within the
panel when connecting electronic accesso-
ries. Remove all sources of power to the ATS
panel before connecting Ekip modules.
Ekip Connect Sofware and Bluetooth and
Programming -modules are suitable for
all ZTS(D) 1600-3000 A and ZTSCT
100-3000 A, 208-480 Vac automatic
transfer switches, refer to Chapters
5.1-5.3. for more details on:
• Ekip Connect -software
• Ekip Programming -module
Ekip Signalling and Com modules are suit-
able for all ZTS(D) 1600-3000 A and
ZTSCT 100-3000 A, 208-480 Vac auto-
matic transfer switches. These modules
are mounted with auxiliary power supply
module, OXEA1 (refer to Chapter 10.3 for
further details).
Ekip-modules mounted with auxiliary
power supply module are (see Chapters
5.4-5.8):
• Ekip Signalling 2K-_
• Ekip Com modules
• Ekip Com Modbus RTU
• Ekip Com Profibus DP
• Ekip Com DeviceNet
• Ekip Com Modbus TCP
• Ekip Com Profinet
• Ekip Com EtherNet/IP
• Ekip Link
—
Fig. 5.1 Programming and bluetooth -modules
—
Fig. 5.2 Ekip Signalling, Com and Link -modules
are mounted to automatic transfer switch OX_
with a auxiliary power supply module, OXEA1
—
5. Electronic accessories