ABB Zenith ZTS T Series - 5.1 Using Ekip Connect Software

64
1
ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A
—
5.1 Using Ekip Connect -software
Ekip Connect is a free software for com-
munication and testing of ABB automatic
transfer switches. The software is com-
patible with ZTS(D) 1600-3000 A and
ZTSCT 100-3000 A, 208-480 Vac auto-
matic transfer switches. It can be
installed on PCs equipped with the
Microsoft Windows® operating system.
To download it, see the address below:
http://www.abb.com/abblibrary/
DownloadCenter/
—
Fig. 5.3 Ekip Connect -software
With its communication function, it allows
you to:
• Monitor the state of the automatic
transfer switches connected and record
information.
• Configure the automatic transfer
switches with customized parameters.
• Configure the electronic accessories,
connected to the automatic transfer
switch via Local Bus.
• Create communication reports.
• Reset configurations.
Further information on the Ekip Connect
application is available from the web site,
see the address below, particularly the
manual 1SDH000891R0002.