Abilica XC-Classic 2000 - Wall Mounted Assembly

14
Wall Mounted Version
STEP 10
Attach the Lower Wall Mounting Bracket (8) to Main Body (1) using: 2 PCs of M8x35mm
Socket Head Screw (53) and M8 Flat Washer (71).
STEP 11
Remove 1 PC of M8x15mm Socket Head Cap Screw (87) and M8 Flat Washer (71) on the Left
Upper Arm (2).
Attach the Upper Wall Mounting Bracket (9) on Left Upper Arm (2) using: the same screw and
washer (87/71).
STEP 12
Remove 1 PC of M8x15mm Socket Head Cap Screw (87) and M8 Flat Washer (71) on the
Right Upper Arm (3).
Attach the Upper Wall Mounting Bracket (9) on Right Upper Arm (3) using: the same screw
and washer (87&71).
NOTE: Fully tighten bolts at end of above steps.
8
1
#89 Allen Wrench 6mm
#88 Wrench 13-15
#53 M8X35mm 2PCS
#71 M8 2PCS