EasyManua.ls Logo

Absaar AB-MJS150 - Risk of Explosion; Fire Hazard

Absaar AB-MJS150
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EN
RISK OF EXPLOSION!
- Do not expose the device to direct sunlight!
- When using the Mini Jumpstarter, do not smoke and keep any
incandescent objects at a distance!
- Do not use the Mini Jumpstarter in confined smoke-filled spaces such
as in the hold of a motorboat.
- Do not use the Mini Jumpstarter near to propane tanks.
- The clamps of the Mini Jumpstarter must be connected to the correct
polarities of the vehicle:
• Red Positive (+) clamp of the Mini Jumpstarter to the Red Positive
(+) terminal of the vehicle battery.
• Black Negative (-) clamp of the Mini Jumpstarter to the Black
Negative (-) Terminal of the vehicle battery.
An Inversion of polarity can damage the Mini Jumpstarter!
FIRE HAZARD!
- Do not crush.
- Do not perforate.
- Do not make the clamps touch each other or create an electrical
connection between them with a piece of metal or a conductor. This
can damage the Mini Jumpstarter or create a hazard.
- Always disconnect the connector of the clamps immediately after use.
- Do not store the Mini Jumpstarter with the clamps connected to the
device.
- The Mini Jumpstarter is only designed to be used for a very short
period of time. Each start-up attempt should not exceed 3 seconds.
Using the Mini Jumpstarter for more than 3 seconds can damage it.
Wait for 1 minute between each start-up attempt.
Caution: Working temperature. Do not expose to working
temperatures in excess of +60°C (+140°F) or less than -20°C (-4°F).
Using the Mini Jumpstarter above or below these temperatures can
reduce the capacity of the Mini Jumpstarter's internal battery or
shorten the service life of the battery.

Other manuals for Absaar AB-MJS150

Related product manuals