Service hotline：400-700-3278
Product maintenance
6.1 Module replacement
6.1.1 Front-installation module
。
Insert the front-maintenance tool into the front maintenance hole of the module and turn it
counterclockwise to remove the module.
Note: Please note the orientation of the module when installing the module. Please place the
arrow facing up.
6.1.2 Rear-installation module
1、Remove power box
As above, use an Allen wrench to unscrew the 10 Allen screws.
2、Disassembly module
unscrew the 8 hexagonal screws in order;
Note: Please hold the handle of the module when loosening the last screw, to prevent the
module flip forward and fall down.
To Next Page
Loading...