Abus FUMK50031W - Page 16

Technical data
16 | EN
 4x screws with raised head for installation
 1x manual
Technical data
Product name
Secvest Small Wireless Magnetic Contact
Item number
FUMK50031W
Compatible equipment
868 MHz narrow band receiver from ABUS
Environmental class
II (EN 50131-1 + A1:2009 Section 7)
Protection class, IP pro-
tection class
IP34 (internal spaces, in its installed state)
IP = international protection or ingress protection
3 = tools and wires
4 = splashing water
Operating temperature
-10°C to +55°C
Humidity, maximum
Non-condensing average relative humidity 75%
Housing material
PC/ABS
Dimensions – sensor
19 x 103 x 24 mm (WxHxD)
Dimensions – magnet
12 x 55 x 12 mm (WxHxD)
Weight – sensor
40 g (with battery)
30 g without battery, 10 g battery only
Weight – Magnet
10 g
Security level
2 (EN 50131-1 + A1:2009 Section 6)
Tamper monitoring
yes
Tamper protection
according to EN50131-2-6 Section 4.5
Displays
1 LED
trigger signalling, for infrared programming
Connections
Jumper to deactivate the front LED
Plug-in terminal
Type of power supply
Type C (EN 50131-1 Section 9 and EN 50131-6 Section 4.1)
Power supply compliant with EN50131-1:2006+A1:2009 9.2 and
EN50131-6 if installed correctly together with Secvest FUAA50xxx.
Power consumption/en-
ergy consumption
3 µA standby current
35 mA max.
Operating voltage
3 V DC
Battery type
1x CR2 battery, 3V, lithium LiMn02
Replacement battery FU2990
Battery life
Typically > 2 years
Battery under voltage
threshold
2.4 V, ‘Flat battery’ fault at < 2.4 V
Voltage monitoring
During operation the voltage provided by the battery is monitored. If
the voltage is below the lower threshold of 2.4 V, a fault report is
sent to the alarm control panel and the user is informed.